Zigbee vs Z-Wave: Frequencies, Range, Hubs and Matter (2026)
By Ethan Halfhide · Updated
Zigbee and Z-Wave are both low-power mesh protocols for smart home devices, and neither is better across the board. Zigbee runs mainly on 2.4 GHz, a band it shares with Wi-Fi, and the CSA counts over a billion deployed Zigbee devices. Z-Wave runs on sub-GHz frequencies (908.42 MHz in the US), requires certification for every device and adds a Long Range mode. Choose by home size, hub and device mix.
Short verdict by use case
| Pick Zigbee if | Pick Z-Wave if |
|---|---|
| You want an Echo or SmartThings-style hub with a Zigbee radio built in | You want a radio band that stays off the crowded 2.4 GHz band |
| You plan to add Thread or Matter later on the same class of 802.15.4 radio | You need very long direct links (Z-Wave Long Range) |
| You want the protocol the CSA says has over a billion deployed devices | You value mandatory certification for every device |
| Your devices sit close together in a compact home | Devices sit far apart, or behind several walls |
Zigbee vs Z-Wave side by side
| Zigbee | Z-Wave | |
|---|---|---|
| Frequency band | 2.4 GHz and sub-GHz (CSA); 802.15.4 defines 900/868 MHz bands alongside 2.4 GHz (Silicon Labs). Zigbee 4.0 adds European 800 MHz and North American 900 MHz support (CSA) | US: 908.42/916 MHz; EU: 868.4/869.85 MHz; AU: 919.8/921.4 MHz (Z-Wave Alliance, Home Assistant) |
| Radio data rate | 250 kbps at 2.4 GHz; 40 or 20 kbps in 900/868 MHz bands (Silicon Labs) | 9.6, 40 or 100 kbps; Long Range uses 100 kbps (Z-Wave Alliance) |
| Network type | Self-organizing, self-healing mesh (CSA) | Mesh, with signals hopping node to node; Long Range uses a star layout (Z-Wave Alliance) |
| Network size | "Several devices to thousands" (Silicon Labs); "scalable to thousands of nodes" (CSA) | 232 nodes; up to 4,000 with Long Range (Z-Wave Alliance) |
| Range | No figure from CSA. Aeotec cites 10 to 20 m typical indoors | 100 m per hop (Z-Wave Alliance spec table). Aeotec cites 15 to 30 m typical indoors |
| Long range variant | Suzi, the Zigbee sub-GHz extension; certification opened September 2, 2026 (CSA) | Z-Wave Long Range: 912/920 MHz in the US, 1 mile line of sight in its first implementation (Z-Wave Alliance) |
| Interoperability and certification | Zigbee 3.0 uses one common application layer certification program for every product (Silicon Labs) | "Every Z-Wave device undergoes mandatory certification" (Z-Wave Alliance) |
| Governing body | Connectivity Standards Alliance (CSA) | Z-Wave Alliance, which owns the trademark and specification |
| Security | AES-128 encryption and authentication, plus elliptic-curve cryptography for device authentication (CSA) | S0 and S2 security classes; Long Range uses S2 Authenticated and S2 Access Control only (Z-Wave Alliance) |
| Typical devices | In-wall switches, plugs, outlets, lights and locks (Amazon, for Echo's Zigbee hub) | Not listed by the Z-Wave Alliance; "more than 4,500 products on the market" |
| Needs a hub | A coordinator radio is required (Home Assistant ZHA docs); Zigbee Direct adds Bluetooth interaction from a phone (CSA) | A Z-Wave gateway or hub is required (Silicon Labs) |
| Relation to Matter | No native interoperability; joins Matter through bridges (CSA Matter FAQ) | Joins Matter through bridges (CSA Matter FAQ, Silicon Labs) |
Aeotec's Smart Home Hub spec sheet lists "up to 100ft indoors" for its Z-Wave radio and up to 40 ft for Zigbee, figures that apply to that hub only.
How Zigbee works
Zigbee sits on top of the IEEE 802.15.4 radio standard, which defines the physical and MAC layers. Silicon Labs' Zigbee documentation states that 802.15.4 runs at 250 kbps in the 2.4 GHz band, and that only "a smaller number" of chip makers support the 900/868 MHz bands. Silicon Labs' own Zigbee chip lineup is mostly 2.4 GHz parts, the band also used by 2.4 GHz Wi-Fi.
A Zigbee network needs a coordinator. Home Assistant's ZHA documentation supports USB and network-connected coordinator radios, and Amazon states that Echo and eero devices have built-in smart home hubs. The CSA describes the mesh as self-organizing and self-healing.
Zigbee 3.0 matters for compatibility. Silicon Labs states that with Zigbee 3.0, "one common application layer certification program applies to every Zigbee product." Amazon's Echo supports both Zigbee 1.2 and 3.0. Home Assistant's ZHA documentation notes there is "no official compatibility list" for its Zigbee integration and that non-standard devices may need custom handlers called quirks.
The standard is still moving. The CSA announced Zigbee 4.0 on November 18, 2025, describing it as "fully backward compatible with Zigbee 3.0 and Smart Energy." It adds security features, reliability changes and support for the 800 MHz (Europe) and 900 MHz (North America) bands. The sub-GHz feature is branded Suzi, and the CSA opened Suzi product certification on September 2, 2026. The CSA says Suzi "is not a replacement for Zigbee's 2.4 GHz operation; it is an extension."
For device options on our side, see the Zigbee smart home devices guide.
How Z-Wave works
Z-Wave uses its own radio and protocol stack on sub-GHz frequencies. In the US, the Z-Wave Alliance lists 908.42/916 MHz for standard Z-Wave. Home Assistant's Connect ZWA-2 spec page lists regional examples: 908.42/916 MHz in the US, 868.4/869.85 MHz in the EU and 919.8/921.4 MHz in Australia. Many products are sold in region-specific versions (Aeotec's Smart Home Hub has separate US, EU/UK and AU models), so check the region before buying.
Standard Z-Wave is a mesh with a limit of 232 nodes, according to both the Z-Wave Alliance and Silicon Labs. Every device must pass certification, which the Z-Wave Alliance presents as the basis for consistent behavior across brands. The Alliance reports "more than 4,500 products on the market today," and Silicon Labs says the Alliance includes over 300 companies producing Z-Wave certified devices.
Z-Wave Long Range
Z-Wave Long Range (often shortened to Z-Wave LR) is a separate mode, and LR and standard Z-Wave nodes can coexist on one network. Per the Z-Wave Alliance spec comparison:
- Frequency (US): 912/920 MHz
- Layout: star, so each device talks straight to the hub
- Network size: up to 4,000 nodes
- Range: 1 mile (1.6 km) line of sight in the first implementation at +14 dBm; the spec targets "up to several miles"
- Security: S2 Authenticated and S2 Access Control only
- Battery: "up to 10-year battery life" on a coin cell
Both the hub and the device must support LR to get its full benefit. A March 2026 Z-Wave Alliance post cites "up to 1.5 miles" for direct hub to device links. For Europe, the Z-Wave Alliance announced on February 29, 2024 that the European LR specification had been completed, with release to members to follow. Home Assistant lists EU LR frequencies of 864.0/866.0 MHz for its ZWA-2 adapter.
Where Thread and Matter fit
Thread vs Zigbee. Thread uses the same IEEE 802.15.4 radio layer as Zigbee, at 250 kbps in the 2.4 GHz band per Silicon Labs. The difference sits higher up: the Thread Group describes Thread as an open, IPv6-based, low-power mesh. Instead of a single hub, Thread uses border routers to connect to your home network. The Thread Group says "there is no need for a dedicated 'hub' or 'gateway'" and that a network may have several border routers, which "eliminates a single point of failure." Because the two share radio hardware, some adapters can run either one. Home Assistant's Connect ZBT-2 supports Zigbee 3.0 or Thread, but its FAQ states it "cannot do both Zigbee and Thread simultaneously."
Matter. The CSA's Matter FAQ states that "Matter natively supports Wi-Fi, Ethernet, and Thread," with Bluetooth LE used for commissioning only. Neither Zigbee nor Z-Wave is a Matter transport. The CSA states there is "no native interoperability between Matter and Zigbee devices," and names Zigbee and Z-Wave as protocols that bridges can bring into a Matter ecosystem. So buying Zigbee or Z-Wave today does not lock you out of Matter, but it does mean you depend on a bridge. For the full picture, read Matter explained.
Hub compatibility
A hub decides which protocols you can use. The list below only includes radios stated on each maker's own pages. For a broader comparison, see smart home hubs compared.
| Hub | Zigbee | Z-Wave | Thread | Matter | Source |
|---|---|---|---|---|---|
| Hubitat Elevation C-8 Pro (US) | Zigbee 3.0 | Z-Wave 800 with Long Range, 908.4 MHz | Not listed | Matter 1.5 | Hubitat |
| Hubitat C-8 Pro Thread Special Edition (US) | No ("does not include built-in Zigbee") | Z-Wave 800 with Long Range | Yes, replaces the Zigbee radio | Matter 1.5 | Hubitat |
| Aeotec Smart Home Hub (SmartThings) | Yes, version not stated | Z-Wave Plus; 908.4 MHz US, 868.4 MHz EU/UK, 921.4 MHz AU | Yes | Yes | Aeotec |
| Aeotec Smart Home Hub 2 (SmartThings) | Yes | Not mentioned | Yes | Yes | SmartThings blog |
| Home Assistant Connect ZBT-2 | Zigbee 3.0 (or Thread, not both) | No | Yes (or Zigbee, not both) | Thread-based Matter devices via Home Assistant | Home Assistant |
| Home Assistant Connect ZWA-2 | No | Z-Wave and Long Range, 800 series, all regions | No | Not stated | Home Assistant |
| Amazon Echo and eero devices with a built-in hub | Zigbee 1.2 and 3.0 | Not mentioned | Not stated on the Zigbee page | Not stated on the Zigbee page | Amazon Developer |
Two takeaways: only the standard Hubitat C-8 Pro has Zigbee, and Home Assistant splits Zigbee/Thread (ZBT-2) and Z-Wave (ZWA-2) into separate adapters, so a mixed home needs both.
Who each protocol suits
Zigbee suits owners of an Echo, a Zigbee-capable SmartThings hub or a Home Assistant Zigbee coordinator, and anyone keeping a path open to Thread. If your home has heavy 2.4 GHz Wi-Fi traffic, note that Aeotec's range guide rates Zigbee's interference risk as high because of 2.4 GHz congestion. When you compare smart home sensors, check which protocol each one uses before you buy.
Z-Wave suits larger homes, detached garages and outbuildings, where sub-GHz signals and Long Range help. Aeotec's range guide states that "lower frequencies lose less energy penetrating walls and solid obstacles." The trade-offs are a required hub and the need to buy devices made for your region.
Both suit owners of a hub with both radios, such as the standard Hubitat C-8 Pro.
FAQ
Should I use Zigbee or Z-Wave?
Use Zigbee if your hub already has a Zigbee radio, such as an Echo with a built-in hub, and your devices sit fairly close together. Use Z-Wave if you need to cover a large home or outbuildings, want to avoid the 2.4 GHz band, or want every device to be certified. If your hub supports both, you can mix them.
Can Zigbee go through walls?
Yes, but walls reduce its range. Zigbee mostly uses 2.4 GHz, and Aeotec's range guidance notes that lower frequencies lose less energy through walls, which favors sub-GHz Z-Wave. Aeotec lists typical indoor Zigbee range at 10 to 20 m. Because Zigbee forms a mesh, signals can hop between devices rather than relying on one direct link.
Is Z-Wave becoming obsolete?
The published facts point the other way. The Z-Wave Alliance reports more than 4,500 products on the market, and it completed a European Long Range specification in 2024. Current products such as the Hubitat C-8 Pro and the Home Assistant Connect ZWA-2 use 800 series Z-Wave with Long Range support. Z-Wave devices can also join Matter through bridges.
Is Zigbee phasing out, and is Matter replacing it?
The CSA's own announcements point the other way. It announced Zigbee 4.0 in November 2025 as fully backward compatible with Zigbee 3.0, and opened certification for its sub-GHz Suzi extension in September 2026. Matter does not run on Zigbee radios, but Zigbee devices can join Matter through bridges.
What is the difference between Thread and Zigbee?
Both use the same IEEE 802.15.4 radio layer at 2.4 GHz. Thread is IPv6-based and uses border routers instead of a single hub, and it is one of the networks Matter natively supports. Zigbee needs a coordinator. Some adapters can run either protocol, but not both at once.
What are the downsides of Z-Wave?
Z-Wave requires a hub or gateway, and frequencies differ by region (908.42 MHz in the US, 868.4 MHz in the EU), so devices must match your region. A standard Z-Wave mesh tops out at 232 nodes. Long Range raises that to 4,000, but its full benefit needs both the hub and the device to support it.
What we could not verify
- SmartThings Station radios. Samsung's product page could not be retrieved, so this guide makes no claim about whether the SmartThings Station supports Z-Wave.
- Which Echo models have a Zigbee hub. Amazon's developer page does not include the model list, so specific Echo models are not named here.
- A single official Zigbee range figure. The CSA gives no distance figure for Zigbee. The indoor figures above are Aeotec's typical estimates.
- Long Range in Europe. The Z-Wave Alliance's What is Z-Wave page says LR "is only available for the US market." Aeotec's range page says LR uses 912/920 MHz in both the US and EU, while Home Assistant lists 864.0/866.0 MHz for EU LR. We cannot confirm EU LR availability or frequencies from a single official source.
- Suzi product availability. The CSA says certification is open but does not say whether certified Suzi products are shipping yet.
- Z-Wave Long Range distance. Z-Wave Alliance pages give both 1 mile (first implementation) and up to 1.5 miles (2026 post). Real distances depend on the device and the site.
How this guide was put together
HomeGearLab compared published specifications from standards bodies, chip makers and hub makers. We did not measure range or run any device ourselves. Every figure comes from a source below; anything we could not confirm is listed in the section above.
Sources
- Connectivity Standards Alliance: Zigbee, accessed November 18, 2026
- Connectivity Standards Alliance: Zigbee 4.0 and Suzi announcement, accessed November 18, 2026
- Connectivity Standards Alliance: Suzi Product Certification is Now Open, accessed November 18, 2026
- Connectivity Standards Alliance: Matter FAQ, accessed November 18, 2026
- Z-Wave Alliance: home page, accessed November 18, 2026
- Z-Wave Alliance: What is Z-Wave, accessed November 18, 2026
- Z-Wave Alliance: European Long Range specification announcement, accessed November 18, 2026
- Z-Wave Alliance: Z-Wave Momentum Builds Across Europe, accessed November 18, 2026
- Z-Wave Alliance: Bridging IoT Protocols: Z-Wave, Matter, and Beyond, accessed November 18, 2026
- Silicon Labs: Zigbee Fundamentals overview, accessed November 18, 2026
- Silicon Labs: Zigbee platform, accessed November 18, 2026
- Silicon Labs: Thread Technology Overview, accessed November 18, 2026
- Silicon Labs: Matter vs Z-Wave: What You Need to Know, accessed November 18, 2026
- Thread Group: What is Thread, accessed November 18, 2026
- Thread Group: Thread Border Router blog, accessed November 18, 2026
- Hubitat: products, accessed November 18, 2026
- Home Assistant: Connect ZBT-2, accessed November 18, 2026
- Home Assistant: Connect ZWA-2, accessed November 18, 2026
- Home Assistant: Zigbee Home Automation (ZHA) integration, accessed November 18, 2026
- Aeotec: Smart Home Hub technical specifications, accessed November 18, 2026
- Aeotec: Zigbee vs. Z-Wave vs. Z-Wave LR: Range Compared, accessed November 18, 2026
- SmartThings blog: Aeotec Smart Home Hub 2 announcement, accessed November 18, 2026
- Amazon Developer: Understand Smart Home Zigbee Support, accessed November 18, 2026
About the author
Ethan Halfhide: Ethan Halfhide is a smart home enthusiast and AI technologist who follows the connected home market closely, from smart locks and security cameras to robot vacuums, lighting, sensors and hubs. He curates HomeGearLab's device directory, comparing products on published specs, compatibility, setup requirements and price so readers can pick gear that fits their home and works together.
Related posts
What Is Home Assistant? A Beginner's Guide for 2026
Home Assistant is free, open source smart home software you run at home. Learn what it does, what it costs, the hardware it needs and how to get started.
Smart Home Automation Devices: The 2026 Room-by-Room Buying Guide
A practical 2026 guide to choosing smart home automation devices room by room, covering Matter and Thread basics plus the buying mistakes you should avoid.